2-phase stepper motor Sanyo Denki ⌀28 mm
Lead time if the product is out of stock (business days):
35
Sanyo Denki SanMotion Series F2
• Stepping motors rotate precisely at a fixed angle (step angle). With each pulse the driver receives from a pulse generator.
• Motors typically have a full step angle of 1.8° with 200 steps.
• Used in a wide variety of applications, including fixed-speed drive synchronized with command pulses, accurate positioning, and stable stopping.
Ø 28 mm (Nema 11), Step angle 1,8°. Bipolar.
• Stepping motors rotate precisely at a fixed angle (step angle). With each pulse the driver receives from a pulse generator.
• Motors typically have a full step angle of 1.8° with 200 steps.
• Used in a wide variety of applications, including fixed-speed drive synchronized with command pulses, accurate positioning, and stable stopping.
Ø 28 mm (Nema 11), Step angle 1,8°. Bipolar.
| Model | Shaft Ø mm | Holding torque | Rated current | Resistance | Inductance | Rotor inertia | Motor length mm | Weight kg | |||
| Single shaft | Dual shaft | N.m | A | Ω/phase | mH/phase | x10⁻⁴ kg m² | |||||
| SH2281-5671 | -5631 | 5 | 0.07 | 0.5 | 10.5 | 7.2 | 0.01 | 32 | 0.11 | ||
| SH2281-5771 | -5731 | 5 | 0.07 | 1 | 2.6 | 1.85 | 0.01 | 32 | 0.11 | ||
| SH2285-5671 | -5631 | 5 | 0.145 | 0.5 | 15 | 13.5 | 0.022 | 51.5 | 0.2 | ||
| SH2285-5771 | -5731 | 5 | 0.145 | 1 | 3.75 | 3.4 | 0.022 | 51.5 | 0.2 | ||
| Series | F2 |
|---|---|
| Product type | 2-phase stepper motor |
| Max torque (Nm) (possible range) | 0.055 - 0.115 |
| Shaft diameter (mm) | 5 |
| Frame size (mm) | 28 |
| Inertia (x10⁻⁴ kg m²) | 0.1 / 0.022 |
| Brand | Sanyo Denki |
